Journal papers 2022
[1]
J. F. Alarcón et al.,
"Disturbance growth on a NACA0008 wing subjected to free stream turbulence,"
Journal of Fluid Mechanics, vol. 944, 2022.
[2]
G. Amberg,
"Detailed modelling of contact line motion in oscillatory wetting,"
NPJ MICROGRAVITY, vol. 8, no. 1, 2022.
[3]
K. Amini, E. D. Janabadi and R. Fayaz,
"Lighting and illumination investigation of long-term residence on Mars for the case of a set of designed Martian Habitat Units (MHUs),"
Acta Astronautica, vol. 192, pp. 210-232, 2022.
[4]
K. Amini et al.,
"Design of a set of habitat units and the corresponding surrounding cluster for long-term scientific missions in the pre-terraforming era on mars,"
Icarus, vol. 385, pp. 115119, 2022.
[5]
A.-R. Atif et al.,
"Experimental Characterization and Mathematical Modeling of the Adsorption of Proteins and Cells on Biomimetic Hydroxyapatite,"
ACS Omega, vol. 7, no. 1, pp. 908-920, 2022.
[6]
M. Atzori, R. Vinuesa and P. Schlatter,
"Control effects on coherent structures in a non-uniform adverse-pressure-gradient boundary layer,"
International Journal of Heat and Fluid Flow, vol. 97, 2022.
[7]
M. Atzori et al.,
"In situ visualization of large-scale turbulence simulations in Nek5000 with ParaView Catalyst,"
Journal of Supercomputing, vol. 78, no. 3, pp. 3605-3620, 2022.
[8]
M. Baungaard et al.,
"Wind turbine wake simulation with explicit algebraic Reynolds stress modeling,"
Wind Energy Science, vol. 7, no. 5, pp. 1975-2002, 2022.
[9]
K. Bazesefidpar, L. Brandt and O. Tammisola,
"A dual resolution phase-field solver for wetting of viscoelastic droplets,"
International Journal for Numerical Methods in Fluids, vol. 94, no. 9, pp. 1517-1541, 2022.
[10]
K. Bazesefidpar, L. Brandt and O. Tammisola,
"Numerical simulation of the coalescence-induced polymeric droplet jumping on superhydrophobic surfaces,"
Journal of Non-Newtonian Fluid Mechanics, vol. 307, 2022.
[11]
G. Borrelli et al.,
"Predicting the temporal dynamics of turbulent channels through deep learning,"
International Journal of Heat and Fluid Flow, vol. 96, 2022.
[12]
L. Brandt and F. Coletti,
"Particle-Laden Turbulence : Progress and Perspectives,"
Annual Review of Fluid Mechanics, vol. 54, pp. 159-189, 2022.
[13]
C. ,. I. Chan et al.,
"Large-scale and small-scale contribution to the skin friction reduction in a modified turbulent boundary layer by a large-eddy break-up device,"
Physical Review Fluids, vol. 7, no. 3, 2022.
[14]
M. Crialesi-Esposito, L. A. Gonzalez-Montero and F. J. Salvador,
"Effects of isotropic and anisotropic turbulent structures over spray atomization in the near field,"
International Journal of Multiphase Flow, vol. 150, 2022.
[15]
M. Crialesi-Esposito et al.,
"Modulation of homogeneous and isotropic turbulence in emulsions,"
Journal of Fluid Mechanics, vol. 940, 2022.
[16]
M. Dellacasagrande et al.,
"A procedure for computing the spot production rate in transitional boundary layers,"
Experiments in Fluids, vol. 63, no. 8, 2022.
[17]
A. D. Demou et al.,
"Turbulent Rayleigh-Benard convection in non-colloidal suspensions,"
Journal of Fluid Mechanics, vol. 945, 2022.
[18]
H. Eivazi et al.,
"Towards extraction of orthogonal and parsimonious non-linear modes from turbulent flows,"
Expert systems with applications, vol. 202, pp. 117038, 2022.
[19]
H. Eivazi et al.,
"Physics-informed neural networks for solving Reynolds-averaged Navier-Stokes equations,"
Physics of fluids, vol. 34, no. 8, 2022.
[20]
D. Gatti et al.,
"Spatial resolution issues in rough wall turbulence,"
Experiments in Fluids, vol. 63, no. 3, 2022.
[21]
Z. Ge and G. J. Elfring,
"Rheology of periodically sheared suspensions undergoing reversible-irreversible transition,"
Physical review. E, vol. 106, no. 5, 2022.
[22]
S. S. Gill et al.,
"Innovative software systems for managing the impact of the COVID-19 pandemic,"
Software, practice & experience, vol. 52, no. 4, pp. 821-823, 2022.
[23]
V. K. Gowda et al.,
"Nanofibril Alignment during Assembly Revealed by an X-ray Scattering-Based Digital Twin,"
ACS Nano, vol. 16, no. 2, pp. 2120-2132, 2022.
[24]
S. M. Habibi Khorasani et al.,
"Near-wall turbulence alteration with the transpiration-resistance model,"
Journal of Fluid Mechanics, vol. 942, 2022.
[25]
A. Hakansson and L. Brandt,
"Deformation and initial breakup morphology of viscous emulsion drops in isotropic homogeneous turbulence with relevance for emulsification devices,"
Chemical Engineering Science, vol. 253, 2022.
[26]
A. Hakansson et al.,
"A criterion for when an emulsion drop undergoing turbulent deformation has reached a critically deformed state,"
Colloids and Surfaces A : Physicochemical and Engineering Aspects, vol. 648, pp. 129213, 2022.
[27]
R. T. Javed et al.,
"Get out of the BAG! Silos in AI Ethics Education: Unsupervised Topic Modeling Analysis of Global AI Curricula,"
Journal of Artificial Intelligence Research, vol. 73, pp. 933-965, 2022.
[28]
C. Kamble et al.,
"Closure modeling in near-wall region of steep resolution variation for partially averaged Navier-Stokes simulations,"
Physical Review Fluids, vol. 7, no. 4, 2022.
[29]
J. S. Kern, A. Hanifi and D. S. Henningson,
"Subharmonic eigenvalue orbits in the spectrum of pulsating Poiseuille flow,"
Journal of Fluid Mechanics, vol. 945, 2022.
[30]
M. H. W. Khin et al.,
"Fluid Flow Induced By An Elastic Plate In Heaving Motion,"
ASEAN Engineering Journal, vol. 12, no. 3, pp. 1-9, 2022.
[31]
V. G. Kleine et al.,
"The stability of wakes of floating wind turbines,"
Physics of fluids, vol. 34, no. 7, pp. 074106-074106, 2022.
[32]
V. G. Kleine, A. Hanifi and D. S. Henningson,
"Stability of two-dimensional potential flows using bicomplex numbers,"
Proceedings of the Royal Society. Mathematical, Physical and Engineering Sciences, vol. 478, no. 2262, 2022.
[33]
E. Lazpita et al.,
"On the generation and destruction mechanisms of arch vortices in urban fluid flows,"
Physics of fluids, vol. 34, no. 5, pp. 051702, 2022.
[34]
S. Le Clainche, M. E. Rosti and L. Brandt,
"application to the turbulent channel flow over an anisotropic porous wall : application to the turbulent channel flow over an anisotropic porous wall,"
Journal of Fluid Mechanics, vol. 939, 2022.
[35]
Y. Lee, G. Amberg and J. Shiomi,
"Vibration sorting of small droplets on hydrophilic surface by asymmetric contact-line friction,"
PNAS Nexus, vol. 1, no. 2, 2022.
[36]
D. Lengani et al.,
"On the receptivity of low-pressure turbine blades to external disturbances,"
Journal of Fluid Mechanics, vol. 937, 2022.
[37]
U. Lācis et al.,
"Nanoscale sheared droplet : volume-of-fluid, phase-field and no-slip molecular dynamics,"
Journal of Fluid Mechanics, vol. 940, 2022.
[38]
V. Mai et al.,
"The Role of Robotics in Achieving the United Nations Sustainable Development Goals-The Experts' Meeting at the 2021 IEEE/RSJ IROS Workshop,"
IEEE robotics & automation magazine, vol. 29, no. 1, pp. 92-107, 2022.
[39]
D. Mamchur et al.,
"Analysis of the state of the art on non-intrusive object-screening techniques,"
Przeglad Elektrotechniczny, vol. 98, no. 2, pp. 168-173, 2022.
[40]
D. Mamchur et al.,
"Application and Advances in Radiographic and Novel Technologies Used for Non-Intrusive Object Inspection,"
Sensors, vol. 22, no. 6, 2022.
[41]
G. R. McPherson, B. Sirmacek and R. Vinuesa,
"Environmental thresholds for mass-extinction events,"
Results in Engineering (RINENG), vol. 13, 2022.
[42]
P. Mirbod et al.,
"Turbulent channel flow of suspensions of neutrally buoyant particles over porous media,"
Journal of Fluid Mechanics, vol. 954, 2022.
[43]
M. Morimoto et al.,
"Assessments of epistemic uncertainty using Gaussian stochastic weight averaging for fluid-flow regression,"
Physica D : Non-linear phenomena, vol. 440, 2022.
[44]
H. Nobis et al.,
"Topology optimization of unsteady flows using the spectral element method,"
Computers & Fluids, vol. 239, pp. 105387, 2022.
[45]
M. Nordenström et al.,
"The structure of cellulose nanofibril networks at low concentrations and their stabilizing action on colloidal particles,"
Carbohydrate Polymers, vol. 297, pp. 120046, 2022.
[46]
P. Olad et al.,
"Towards best practice recommendations for turbulence modelling of high-pressure homogenizer outlet chambers : Numerical validation using DNS data,"
Chemical Engineering Science, vol. 258, pp. 117748, 2022.
[47]
L. P. Parker et al.,
"Cannulation configuration and recirculation in venovenous extracorporeal membrane oxygenation,"
Scientific Reports, vol. 12, no. 1, 2022.
[48]
L. P. Parker et al.,
"Impact of altered vena cava flow rates on right atrium flow characteristics,"
Journal of applied physiology, vol. 132, no. 5, pp. 1167-1178, 2022.
[49]
L. P. Parker et al.,
"Computational Fluid Dynamics of the Right Atrium : A Comparison of Modeling Approaches in a Range of Flow Conditions,"
Journal of Engineering and Science in Medical Diagnostics and Therapy, vol. 5, no. 3, 2022.
[50]
S. Parvar, C. B. da Silva and F. Pinho,
"Thermal boundary layer of laminar flow of dilute polymer solution,"
International Journal of Heat and Mass Transfer, vol. 185, 2022.
[51]
D. Pastor-Escuredo, P. Treleaven and R. Vinuesa,
"An Ethical Framework for Artificial Intelligence and Sustainable Cities,"
AI, vol. 3, no. 4, pp. 961-974, 2022.
[52]
J. D. Paton-Romero et al.,
"State of Gender Equality in and by Artificial Intelligence,"
IADIS International Journal on Computer Science and Information Systems, vol. 17, no. 2, pp. 31-48, 2022.
[53]
A. Perez Martinez et al.,
"Appraisal of cavity hot-wire probes for wall-shear-stress measurements,"
Experiments in Fluids, vol. 63, no. 9, 2022.
[54]
E. R. Popescu et al.,
"Interaction between the turbulent boundary layer flow of superheated vapor and the velocity field induced by liquid vaporization,"
International Journal of Heat and Fluid Flow, vol. 97, 2022.
[55]
R. Pozuelo et al.,
"An adverse-pressure-gradient turbulent boundary layer with nearly constant beta similar or equal to 1.4 up to Re-theta similar or equal to 8700,"
Journal of Fluid Mechanics, vol. 939, 2022.
[56]
H. Jr. Quintanilha et al.,
"Transient growth analysis of hypersonic flow over an elliptic cone,"
Journal of Fluid Mechanics, vol. 935, 2022.
[57]
S. Rezaeiravesh, R. Vinuesa and P. Schlatter,
"An uncertainty-quantification framework for assessing accuracy, sensitivity, and robustness in computational fluid dynamics,"
Journal of Computational Science, vol. 62, 2022.
[58]
M. Sarabian, M. E. Rosti and L. Brandt,
"Interface-resolved simulations of the confinement effect on the sedimentation of a sphere in yield-stress fluids,"
Journal of Non-Newtonian Fluid Mechanics, vol. 303, pp. 104787, 2022.
[59]
K. Sasaki et al.,
"Parabolic resolvent modes for streaky structures in transitional and turbulent boundary layers,"
Physical Review Fluids, vol. 7, no. 10, 2022.
[60]
D. Schmekel et al.,
"Predicting Coherent Turbulent Structures via Deep Learning,"
Frontiers in Physics, vol. 10, 2022.
[61]
B. Sirmacek and R. Vinuesa,
"Remote sensing and AI for building climate adaptation applications,"
Results in Engineering (RINENG), vol. 15, 2022.
[62]
J. Sundin and S. Bagheri,
"Slip of submerged two-dimensional liquid-infused surfaces in the presence of surfactants,"
Journal of Fluid Mechanics, vol. 950, 2022.
[63]
J. Sundin et al.,
"Heat transfer increase by convection in liquid-infused surfaces for laminar and turbulent flows,"
Journal of Fluid Mechanics, vol. 941, 2022.
[64]
A. Surendran et al.,
"A low frequency model for the aeroacoustic scattering of cylindrical tube rows in cross-flow,"
Journal of Sound and Vibration, vol. 527, pp. 116806, 2022.
[65]
N. Tabatabaei et al.,
"RANS Modelling of a NACA4412 Wake Using Wind Tunnel Measurements,"
Fluids, vol. 7, no. 5, 2022.
[66]
P. Varela et al.,
"Deep Reinforcement Learning for Flow Control Exploits Different Physics for Increasing Reynolds Number Regimes,"
Actuators, vol. 11, no. 12, 2022.
[67]
R. Vinuesa and S. L. Brunton,
"Enhancing computational fluid dynamics with machine learning,"
NATURE COMPUTATIONAL SCIENCE, vol. 2, no. 6, pp. 358-366, 2022.
[68]
R. Vinuesa and S. Le Clainche,
"Machine-Learning Methods for Complex Flows,"
Energies, vol. 15, no. 4, 2022.
[69]
R. Vinuesa et al.,
"Flow Control in Wings and Discovery of Novel Approaches via Deep Reinforcement Learning,"
Fluids, vol. 7, no. 2, 2022.
[70]
L. H. von Deyn et al.,
"Ridge-type roughness : from turbulent channel flow to internal combustion engine,"
Experiments in Fluids, vol. 63, no. 1, 2022.
[71]
G. Wang et al.,
"Enhanced High Thermal Conductivity Cellulose Filaments via Hydrodynamic Focusing,"
Nano Letters, vol. 22, no. 21, pp. 8406-8412, 2022.
[72]
S. Yada et al.,
"Droplet Impact on Asymmetric Hydrophobic Microstructures,"
Langmuir, vol. 38, no. 26, pp. 7956-7964, 2022.
[73]
L. Yu et al.,
"Three-dimensional ESRGAN for super-resolution reconstruction of turbulent flows with tricubic interpolation-based transfer learning,"
Physics of fluids, vol. 34, no. 12, pp. 125126, 2022.
[74]
A. Zarei et al.,
"Experimental investigation of the heat transfer from the helical coil heat exchanger using bubble injection for cold thermal energy storage system,"
Applied Thermal Engineering, vol. 200, 2022.
[75]
W. Zhang et al.,
"A phase-field method for three-phase flows with icing,"
Journal of Computational Physics, vol. 458, pp. 111104, 2022.